Home Charging

Installed from £966

EO MINI PRO 3

SMALL AND STYLISH DESIGN:

Compact and ergonomic EV charging station, same size as an A5 notepad (230mm x 151mm x 125mm).

FAST CHARGING:

Charging capacity of 7.2kW (single-phase), perfect for overnight charging.

SMARTPHONE APP CONTROLLED:

The EO app lets you review your charging history, monitor energy usage, and start and stop EV charging sessions all from the palm of your hand.

ONE FOR ALL:

Compatible with all Type 2 electric vehicles, the perfect plug-and-play charging solution.

NOW INCLUDED AS STANDARD

CHARGE YOUR CAR WITH SUNSHINE:

Future-proof your energy needs with the EO Mini Pro 3. This charger comes with CT clamps as standard, so you can charge your car from your solar panels. On cloudy days, the charger will supplement with green grid energy.

BYE-BYE BLACKOUTS:

Worried about energy blackout when plugging in at home? The EO Mini Pro 3 has power balancing capability to avoid overloading your electrical supply. Charge your car with confidence, knowing that your home’s electrical system is protected.

Get a quote

Cable entry

Power install options available through the rear of the enclosure or at the base

Built in PME

Meets UK smart charging regulations and prevents the need for unsightly earth rods

Mounting options

Wall or post mounted, suitable for indoor or outdoor installation (IP56/IP54 rated)

Wide temperature range

Operates in temperatures between -25°C & 50°C

DC Leakage Protection

Integral 6mA DC leakage detection, no Type B RCD required

Socketed or Tethered

Socketed allows the user to remove the cable and store separately, tethered comes with a fixed cable that cannot be removed

Cables

The Tethered EO Mini Pro 3 is only available with a 5 metre cable, but the socketed unit is available with 3 lengths of cable (5m, 7.5m & 10m)

3-year warranty

3-year warranty as standard with options to extend available

Supply and Installation of Electric Vehicle Charge Point (EVCP) to a wall or permanent fixture, as per Device Manufacturer's recommendations
Routing of the cable through a single wall of up to half a metre thickness
Installation of a type 2 surge protection device (SPD) to protect the charging circuit
Surface mounted external cable clipped direct to wall surface
The fitting and testing of electrical connections, protections, and equipment as required
NICEIC certification - Electrical Protection Certificate to ensure the safety of a property’s electrical installation work with a declaration that the new installation is safe to use
Full service and after care for installing into the walls or neighbouring facility
Syncing of unit with Client wifi (if applicable) and sync, test and demonstrate the mobile application

Brief Client demonstration of unit, controls and mobile application
Transport of unit from storage to Client Premises along with all required installation materials
Up to 15 metres of cable, run and neatly clipped to the wall between the electricity supply meter/distribution board and the EVCP
Plastic conduit/trunking to conceal interior wiring
Supply and installation of a CT clamp that accompanies the device - helps to monitor the load (amps) going through your premises, enabling the customer to adjust the power to and from their charger
Cable end ferrules to be used with all multi-stranded cabling

Can I order an EO charger without installation and use my own electrician to install the charger?

All EO Charging products must be installed by an EO Approved Installer, this is to ensure that the product is installed correctly and that you've got access to a reliable and easy to use charger. Please note that if you do not use an EO Approved Installer then the smart features of your charger will remain locked and the warranty will be invalid. We are also unable to provide support through the installation process for a charger where non-EO Approved Installers are used.

How long is the cable on a tethered unit?

All our tethered chargers come with a 5m long cable as standard as it's a good compromise between ease of use and ease of storage. That said, 7.5m and 10m cable length are available for the tethered EO Genius 2 which can be ordered directly through to our team when booking your installation. Please note that longer cables are not available for the EO Mini Pro 3 as the small size of the unit has been specifically designed to carry the weight of a 5m cable.

What happens if my installation is non-standard?

Non-standard charger installations may incur an additional cost. Once your order is placed, we'll be in touch to better understand your requirements and produce a no-obligation quote for the additional works.